PCB FOR DIY GUITAR EFFECTS

Size of Board: 49mm WIDE x 27mm HEIGHT (1590B Sized BOX OK)

> Transistor are 2n5088 / 2n5089. BC109C / BC549 will work but compare the layout with 2n508x before use.
> Plenty of tone available.  It clean up real well with your guitar volume. 
> 1SPDT Swith is for clipper mod. 1N4004 can be an LED. I love this very much.
> Original pedal doesn’t come with the volume POT.  You may jumper the 2 round pads if you want to obmit it. 
> Square pads is the first lug of POT.
> Use MULTIDIP Capacitor for bigger cap (104).

Here is the first one…..

Size of board:  30mm WIDE x 27mm HEIGHT (1590B Sized BOX OK)
SHO ; MOSFET CLEAN BOOST. 
Built Verified!
Reverse the MOSFET direction if BS170 was used.  Infact it sound better with BS170.

I will post PCB layouts for DIY guitar effects in this blog.

They are drawn from schematics that floating around the net, verified / non verified, some with additional slots allocated for mods, some are pure.  (Thank to freestomboxes community for all resources shared).

The ownership of the circuit / design remain to their respective owner but the layout / pcb artwork are MINE.

Reposting is strictly limited.
Contents are for personal application only.
Wihtout my authorization, other application of these contents that may generate income, directly or indirectly are strictly prohibited.

If you have any suggestion / comment, do let me know thru pcb4diyeffects@gmail.com.
Should you need these for your project, i can do a ready to solder PCB for you.
Just drop me an email.

If you find this page is useful and wish to offer a token of appriciation, please donate thru PAYPAL.

Your appreciation keep this site growing.

Lynessmy