SHO_TWINS - NOT WORKING!!!!
THIS IS NOT WORKING.
BUT SHOULD WORK IF YOU DIDN’T USE NO MILLENIUM BYPASS ON IT.
Sized of Board: 82mm WIDE X 24mm HEIGHT (1590B Box - vertically mount ok!)
Millenium Bypass is on board.
M1 & M2 is “Millenium Signal” for channel 1 & 2 respectively.
The symbol of BS170 is reverse (this is 2N7000 layout infact). Please reverse the transistor when you install it.
In = Input port for Channel 1.
OUT1 = Output port for Channel 1.
In1 = Input port for Channel 2.
OUT = Output for Channel 2.
